Ice machine configuration introduction
1 min readFrom a structural point of view, ice making machines can be basically divided
into: compressor, evaporator, condenser, expansion valve, electronic control
components, and equipment frame.
Compressors include Bitzer, Laifukang, Hanzhong, and Fusheng are more common.
Bitzer is from Germany, Laifukang is from Italy, Hanzhong and Fusheng, and there
are many other brands of compressors. It takes a little time to Basically
everything can be understood clearly.
Evaporator: The evaporator of the direct cooling block ice machine is the ice
mold, which is made of aluminum alloy. The size can be customized, and the
manufacturing process is similar.
Condenser: There are many manufacturers of condensers, including evaporative
cooling, water cooling, and air cooling. When the north freezes in winter, it is
recommended to use evaporative cooling or air cooling. In the south, evaporative
cooling or water cooling can be used.
Expansion valve: The more well-known ones are Danfoss and Emerson, but there
are fewer domestic brands.
Electrical components: high-end Mitsubishi, Schneider, Siemens, domestic ones
generally use Chint.
Equipment frame: Generally speaking, it depends on the specifications of the
steel and the thickness of the material. The surface treatment is usually paint.
The better one is hot-dip galvanizing. Stainless steel is the best, but the cost
is too high and is rarely used.
https://www.gdyuebingli.com/Ice-machine-configuration-introduction.html
https://www.gdyuebingli.com/Integrated-ice-machine-series-air-cooling.html
https://www.gdyuebingli.com/Four-door-vertical-freezer.html
Vivi
838792590@qq.com
About Author
